technical data sheet high accuracy power sensor PSN50 introduction the high accuracy power sensor is the latest addition to anritsus handheld products. it is designed to provide field users with a practical power sensor solution for base station testing by delivering bench top accuracy to the field environment. the 50 mhz to 6 ghz PSN50 sensor delivers true rms measurements from -30 to +20 dbm enabling users to make accurate measurements for both cw and digitally modulated signals such as gsm/gprs/edge, cdma/ev-do, wcdma/hsdpa, and wimax. the sensor connects to the mt8222a bts master and ms272xb spectrum master products with the usb interface. the rs-232 serial port is used to connect to the s331d, s332d, ms2711d, mt8212b products. 50 mhz to 6 ghz frequency range accurate measurements over a wide frequency range. -30 to +20 dbm dynamic range true rms measurements over a 50 db dynamic range enabling users to make accurate cw and modulated power measurements. important for service providers. a small error in power can have a significant impact on coverage area. cal factor correction improve overall accuracy by correcting for efficiency and mismatch losses. zero remove noise and improve overall accuracy for low level signals (< -20 dbm) averaging apply averaging to signals with high variation. max hold displays the maximum value of the non-averaged data. good for frequency hopping signals. limit setup turns on limits and setup pass/fail criteria for the measurements. the results are color coded: green-pass, red-fail dual display view power readings linearly in watt and logarithmically in dbm without selecting the units. offset compensation remove any attenuators connected to the sensor. key features and benefits free datasheet http://
2 PSN50 calxpert ? software application for calibrating PSN50 power sensors PSN50 calxpert ? is a calibration wizard that guides you through the range connection test and performs the necessary operations to upload calibration data into the power sensor. it provides a convenient way to: perform range connection characterization ? upload the new range connection characterization data into the sensor ? upload 50 mhz sensitivity calibration and calibration factor data into the sensor* ? provide a report of new and old calibration data ? as a precaution, PSN50 calxpert ? will also retain a file of the old calibration data that the user can restore to the sensor using PSN50 calxpert ? if required. * PSN50 calxpert does not control the full suite of equipment to obtain sensitivity calibration and calibration factor data C it is assumed that users have access to an appropriately equipped calibration lab to obtain this data. PSN50 calxpert can be used with a pc to read the responses of the power sensor during the gathering of calibration factor and sensitivity data. equipment requirements for performing range connection characterization and to upload calibration data into the sensor. computer equipped as follows: ? intel 1. ? pentium ? iii with 1 gb ram or intel ? pentium ? iv with 512 mb ram, or equivalent (intel ? pentium ? iv with 1 gb ram recommended) microsoft 2. ? windows vista ? (32-bit only), windows xp or windows 2000 microsoft 3. ? .net 3.5 100 mb hard-disk free space 4. display resolution 1024 768 5. usb 2.0 full speed (compatible with usb 1.0 and 1.1) interface 6. cd-rom drive 7. synthesizer: 50 mhz to 6 ghz, +15 dbm minimum (anritsu mg3690 series) ? reference power meter and sensor: absolute power accuracy better than 0.5 db ? (anritsu ma24106a or ml2437a, with ma2442d) 10 db fixed attenuator: 1.25 swr from 50 mhz to 6 ghz (anritsu 41ka-10) ? k to n adapter (anritsu 34nfk50) ? 3 3 3 k to n adapter 10 db attenuator synthesizer reference power meter reference sensor PSN50 anritsu PSN50 calxpert application typical equipment setup for range connection characterization free datasheet http://
3 specifications sensor: measurement range: -30 to +20 dbm frequency range: 50 mhz to 6 ghz input connector: type n, male, 50 max input without damage: +33 dbm, 25 vdc input return loss: 50 mhz to 2 ghz: 26 db 2 ghz to 6 ghz: 20 db accuracy: total rss measurement uncertainty (0 oc to 50 oc): 0.16 db* noise: 20 nw max zero set: 20 nw zero drift: 10 nw max** sensor linearity: 0.13 db max instrumentation accuracy: 0.00 db sensor cal factor uncertainty: 0.06 db temperature compensation: 0.06 db max continuous digital modulation uncertainty: + 0.06 db (+17 to +20 dbm) system: measurement resolution: 0.01 db offset range: 60db power requirements (external power required for s331d, s332d, ms2711d, mt8212b) supply voltage: 8 to 18 vdc supply current: < 100 ma interfaces: rs-232 serial interface (s331d, s332d, ms2711d, mt8212b) mini-b usb: (mt8222a, ms2721b, ms2723b, ms2724b) * excludes mismatch errors. excludes noise, zero set, zero drift for levels < -20 dbm. excludes digital modulation uncertainty between +17 and +20 dbm. ** after 30 min warm-up ordering information note: PSN50 sensor sold separately. anritsu p/n description PSN50 high accuracy power sensor, 50 mhz to 6 ghz mt8222a-019 high accuracy power meter mt8222a ms2721b-019 high accuracy power meter ms2721b ms2723b-019 high accuracy power meter ms2723b ms2724b-019 high accuracy power meter ms2724b s33xd/19 high accuracy power meter s331d/s332d ms2711d/19 high accuracy power meter ms2711d mt8200/19 high accuracy power meter mt8212b 3-1010-122 attenuator (bi-directional), 20 db, 5 watt, dc to 12.4 ghz, n(m) to n(f) 3-1010-123 attenuator (bi-directional), 30 db, 50 watt, dc to 8.5 ghz, n(m) to n(f) 3-1010-124 attenuator (bi-directional), 40 db, 100 watt, dc to 8.5 ghz, n(m) to n(f) 2300-534 PSN50 calxpert? upgrade path for existing mt8212b, s33xd, ms2711d, and mt8222a customers nd66441 high accuracy power meter software retrofit kit for s33xd nd66446 high accuracy power meter software retrofit kit for ms2711d nd66444 high accuracy power meter software retrofit kit for mt8212b mt8222a-219 high accuracy power meter software retrofit kit for mt82222a free datasheet http://
11410-00414, rev. b printed in united states 2010-06 ?2010 anritsu company. all rights reserved. ? anritsu all trademarks are registered trademarks of their respective companies. data subject to change without notice. for the most recent specifications visit: www.anritsu.com anritsu corporation 5-1-1 onna, atsugi-shi, kanagawa, 243-8555 japan phone: +81-46-223-1111 fax: +81-46-296-1238 ? u.s.a. anritsu company 1155 east collins boulevard, suite 100, richardson, tx, 75081 u.s.a. toll free: 1-800-anritsu (267-4878) phone: +1-972-644-1777 fax: +1-972-671-1877 ? canada anritsu electronics ltd. 700 silver seven road, suite 120, kanata, ontario k2v 1c3, canada phone: +1-613-591-2003 fax: +1-613-591-1006 ? brazil anritsu electr?nica ltda. pra?a amadeu amaral, 27 - 1 andar 01327-010 - bela vista - s?o paulo - sp - brasil phone: +55-11-3283-2511 fax: +55-11-3288-6940 ? mexico anritsu company, s.a. de c.v. av. ejrcito nacional no. 579 piso 9, col. granada 11520 mxico, d.f., mxico phone: +52-55-1101-2370 fax: +52-55-5254-3147 ? u.k. anritsu emea ltd. 200 capability green, luton, bedfordshire lu1 3lu, u.k. phone: +44-1582-433280 fax: +44-1582-731303 ? france anritsu s.a. 12 avenue du qubec, batiment iris 1-silic 638, 91140 villebon sur yvette, france phone: +33-1-60-92-15-50 fax: +33-1-64-46-10-65 ? germany anritsu gmbh nemetschek haus, konrad-zuse-platz 1 81829 mnchen, germany phone: +49 (0) 89 442308-0 fax: +49 (0) 89 442308-55 ? italy anritsu s.p.a. via elio vittorini, 129, 00144 roma, italy phone: +39-06-509-9711 fax: +39-06-502-2425 ? sweden anritsu ab borgafjordsgatan 13, 164 40 kista, sweden phone: +46-8-534-707-00 fax: +46-8-534-707-30 ? finland anritsu ab teknobulevardi 3-5, fi-01530 vantaa, finland phone: +358-20-741-8100 fax: +358-20-741-8111 ? denmark anritsu a/s (for service assurance) anritsu ab (for test & measurement) kirkebjerg all 90 dk-2605 br?ndby, denmark phone: +45-7211-2200 fax: +45-7211-2210 ? russia anritsu emea ltd. representation office in russia tverskaya str. 16/2, bld. 1, 7th floor. russia, 125009, moscow phone: +7-495-363-1694 fax: +7-495-935-8962 ? united arab emirates anritsu emea ltd. dubai liaison office p o box 500413 - dubai internet city al thuraya building, tower 1, suite 701, 7th floor dubai, united arab emirates phone: +971-4-3670352 fax: +971-4-3688460 ? singapore anritsu pte. ltd. 60 alexandra terrace, #02-08, the comtech (lobby a) singapore 118502 phone: +65-6282-2400 fax: +65-6282-2533 ? india anritsu pte. ltd. india branch office 3rd floor, shri lakshminarayan niwas, #2726, 80 ft road, hal 3rd stage, bangalore - 560 075, india phone: +91-80-4058-1300 fax: +91-80-4058-1301 ? p. r. china (hong kong) anritsu company ltd. units 4 & 5, 28th floor, greenfield tower, concordia plaza, no. 1 science museum road, tsim sha tsui east, kowloon, hong kong, p.r. china phone: +852-2301-4980 fax: +852-2301-3545 ? p. r. china (beijing) anritsu company ltd. beijing representative office room 2008, beijing fortune building, no. 5 , dong-san-huan bei road, chao-yang district, beijing 100004, p.r. china phone: +86-10-6590-9230 fax: +86-10-6590-9235 ? korea anritsu corporation, ltd. 8f hyunjuk bldg. 832-41, yeoksam-dong, kangnam-ku, seoul, 135-080, korea phone: +82-2-553-6603 fax: +82-2-553-6604 ? australia anritsu pty ltd. unit 21/270 ferntree gully road, notting hill victoria, 3168, australia phone: +61-3-9558-8177 fax: +61-3-9558-8255 ? taiwan anritsu company inc. 7f, no. 316, sec. 1, neihu rd., taipei 114, taiwan phone: +886-2-8751-1816 fax: +886-2-8751-1817 free datasheet http://
|
